Products .
Open Testing Platforms . Stand alone Testing Platforms
H71002200
6tl-22 Testing Platform
Features • Modular build-up using 19 inches standard instruments and devices, 100% reconfigurable, upgradeable and reusable into other platforms. • Standardized Test Fixtures for VPC Gemini 12 (12 slot), G12X (18 slots), or 9025TR (25 slot) Receivers for testing PCB’s or Assembled Devices, with manual linear pushing system included, or using an external automatic Servo Pusher allowing low cost fixtures to be used. • Industrial PC Controller with auxiliary UPS included, allowing automatic starting at Power-On and a controlled Power-down even in case of Power Failure. • Advanced CAN bus Control for all 6tl modules including Operator Virtual Control Panels (Soft panels) allowing manual operation and test software debugging. • National Instruments® PXI Chassis, optional • YAV switching and special function modules, with almost no interconnection cabling needed, and optimal Signal Integrity guaranteed. Modules can handle signals from DC up to 2,5 GHz. • Automatic Test Fixtures Identification and Test Executive Software Selection. • Smart Test Fixtures include Non Volatile DUT data and Programmable Maintenance Counters. • Advanced Test Software based on NI LabView/TestStand and Phi6 Test Manager. • Options for Controlled Rejection Channel, BAR Code and/or Matrix Code Readers, Printer, and Light & Alarm Beacon. • Teleservice by Ethernet fixed IP address.
Applications • Electronic Boards Test • LED Lighting Devices Test • Assembled Electronic Products Test
6tl-22 Platform is a perfect basis for an automatic integrated Test Systems low to medium manufacturing volumes. Important technical and economical advantages due to its modular structure and expansion capability are evident. The System Control and Automation is based on CAN bus. One single four-wire cable provides power to and controls all the devices. The system is simple, ease to maintain and cost effective.
It includes an industrial PC Controller and UPS that controls all steps for automatic error free power-up and down of the Test System. To start working with the Test System during production it is not needed to have any know-how of the Windows operating system or any additional test system knowledge. Switching ON the power, the System is automatically initialized and starts the Test Software. Then the attached test fixture is identified and automatically selects the adequate executive software that matches it. The Controller has 6 free slots to install PCI cards.
Different test fixtures can be used to test PCBs or assembled products. For testing PCB’s, there is a choice of standard fixture platforms includ-ing their own linear pushing system, or alterna-tively a low cost fixture solution using the automatic precision servo pusher module with three pre-set position levels for HiPot test, Functional Test and ICT test using different lengths of test probes. Test Instruments may be selected in PCI format (6 free PCI slots available in the PC Controller), PXI format after installing a 5 to 18 slots PXI chassis, or any other LXI, VXI or Rack&Stack type of instrumentation.
Optional accessories are available: • Controlled Rejection Channel to force controlled removal of rejected DUTs preventing any mixture with good ones. Can be installed at the top or middle right or left side of the test platform. • Printer to print Test Results or an Iden-tification Label • Bar Code or Data Matrix Reader • Platform Status Indication light tower • Auxiliary Side Table
All the installed devices include an Operator Virtual Control Panel to allow manual opera-tion, test software debugging, and problems diagnostic. Each 6tl-22 Platform includes Remote Service capability trough a fixed IP, Internet Connection
Mains Power
Nominal operating voltage
230V50-60
Maximum consumption
800 W
General specifications
Device management software, phi6.
Maximum PCB dimensions
450 x 350 /
550 x 350 mm
Environmental Specs
Operating Temperature
-10 ... +50±C
no ice
Humidity
5 ... 85%
Maximum vibration
10 Gs
Maximum Shock
5 Gs
Ordering information
Description
P/N
Test Platform 6tl-22 with Gemini 12
H7100
2200
Test Platform 6tl-22 with Gemini 12X
H7100
2210
19” Servo pusher for Off Line
systems (includes safety protection),450 x 340 mm
H7100
6000
Pushers Cassette, 450 mm with 10
pushers included 7200.7945
H7200 7945
Fixture 7300 ITA G12 PCB 370x270
H7200 7300
Fixture 7301 ITA G12 PCB
470x270
H7200 7301
Fixture 7100 Off line G12 with
pusher system included. 250x310 mm
H7200 7100
Fixture 7200 Off line G12 with dual
pusher system included.
H7200 7200
Three color Beacon CAN bus
controlled
H7800
1000
Rejection channel for 6TL 22
platform
H7100
22CR
Label Printer
88860201044
Bar Code Reader 7350.5000
with mechanical support
MMMS9520
Side Stand Kit for label printer
60IL00125X
Data Matrix Reader 7350.4000 with
manual adjustment Kit
H7350
4000
5 slot PXI Chassis PXI-1033 for
external controller. Includes 19” mounting Kit
